Tyco Ethernet Link Has Double Port Density

Tyco has launched the RJ point five connector system Ethernet link, designed to offer double the port density of the standard RJ 45 Ethernet link while maintaining field termination capability. The product supports Gigabit speeds of Cat5E UTP cable, in integrated and non-integrated magnetic solutions, with a roadmap to support PoE+ and 10GBASE-T over Cat 6a cable.

With port spacing on a 7mm centerline, the RJ point five connector occupies about half the space of an RJ 45 Ethernet link - utilising the same footprint to support both integrated magnetic and non-integrated solutions. The modular configuration of the receptacle allows for easy and rapid deployment of product extensions. Along with the high-density receptacle, Tyco provides the mating cable assembly designed to provide superior electrical performance. The legacy 3/6 contact pairing in RJ 45 applications has been replaced with a quadrant-style design to minimise noise and maximise return loss performance.

The latching feature supports a lanyard that will facilitate up to 96 ports on a single line card. The cable assemblies are capable of field termination. Cable-management solutions for single box and rack configurations are also available. Specific applications include: high-density Ethernet switching/routing products, data-centre switching (top of rack, end of row, and mid row), server I/O and wiring-closet switching products.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more