WEG Customises Control Panel For Plasson's Factory

WEG has developed a control panel that monitors the ventilation circuits, temperature, humidity, lighting and feeder lines at Plasson's factory. Plasson manufactures equipment and sells services for aviculture. The system ensures better use of feed ration, optimises environmental requirements and delivers higher quality and productivity. WEG has an exclusive team for sales, engineering and assembly of control panels for the OEM machine-building segment, partnering with customers to provide complete solutions that improve quality and reliability and increase speed and throughput.

In these partnerships, WEG's team works closely with customers' engineering and development teams to analyse applications and suggest and specify improvements that make individual projects feasible, in both technical and commercial terms. After this first phase, a prototype is assembled and tested by the customer. When everything has been finally approved, WEG begins series supply. Plasson asked WEG to standardise the environment control panels and feeders that it manufactures and supplies. The objective was to improve the reliability of the systems, provide the ideal environmental requirements and increase productivity in breeding chickens and turkeys.

'The major benefits we are enjoying as a result of our partnership with WEG are the reliability of the products and the standardisation that we have been able to achieve by using them,' said Gilberto Franke Hobold, general director at Plasson. 'In addition, because WEG was able to provide a weekly delivery schedule for the control panels, this improved our logistics and helped us with stock reduction. 'WEG's flexibility was a great advantage in this partnership. 'At any stage of the project where we wanted something different, WEG was always listening to our requirements and careful to develop what we actually needed,' Hobold added.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more