Data Logger Stores 4,080 Temperature Readings

Measurement Computing's USB-501-LT data logger, available in the UK from Adept Scientific, measures and stores up to 4,080 temperature readings over the -10C to +50C (+14 to +122F) measurement range. It offers 15-minute, 30-minute, one-hour and two-hour sampling intervals and a battery life of one month (continuous use). When the button is pressed, a red/green light-emitting diode indicates whether or not a preset alarm level has been breached.

The user can configure the data logger and download the stored data by plugging the module straight into a PC's USB port and running the purpose-designed software under Windows 2000 or XP. The data can then be graphed, printed and exported to other applications. The data logger is supplied with a battery installed. The USB-500 Series Data Logger Application software runs in Windows 2000 and XP (Home Edition and Professional Edition).

It allows the user to configure the USB-501-LT logger and download and display the data graphically in a strip chart. The software also enables export to Excel. Other features include a USB interface for setup and data download; two user-programmable alarm thresholds; and dimensions of 68 x 18 x 9.4mm (2.7 x 0.7 x 0.4in). The Measurement Computing product range is supplied and supported in the UK by Adept Scientific.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more