Autodesk Inventor 2011 Supports 3Dconnexion Mice

3Dconnexion's range of 3D mice is now supported by Autodesk Inventor 2011 software, giving design engineers more control over 3D models and the overall digital prototyping process. 3Dconnexion 3D mice complement the design capabilities and specialised tools offered in the latest Inventor software suite. Conceptual design, engineering and manufacturing professionals working in Inventor 2011 can navigate designs with a 3Dconnexion mouse, allowing them to validate the form, fit and function of a design before it is built, as if they were holding the digital model in their hand.

This added control helps professionals accelerate design times and identify potential design flaws with greater ease. 3Dconnexion said that its 3D mice offer product development teams a range of design performance and productivity benefits for 3D mechanical design, product simulation, tooling creation and design communication, including: improved control and navigation allows users to simultaneously pan, zoom and rotate models or simulations without stopping to select commands; greater productivity with customisable programmable buttons that provide quick access to common commands; advanced design performance by aiding in the detection of design flaws and enhancing design review, verification and presentation; and increased comfort with traditional mouse clicks reduced by up to 50 per cent.

The entire 3Dconnexion product line is compatible with these applications, including the Professional Series with the Spacepilot Pro and Spaceexplorer, and the Standard Series with the Spacenavigator and Spacenavigator for Notebooks.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more