Autocad And Cadworx Now Integrate With Each Other

The Intergraph Cadworx 2010 plant-design software for smaller projects now integrates with Autocad 2011. Cadworx 2010 builds on current capabilities and performance-enhancing features, including a parametric pipe-support modeller for user-defined intelligent pipe supports, an Isogen version 9.3 update, new steel shapes, import and export capabilities for CIS/2 format files, and features that allow structural steel models to be created from project databases.

Other Cadworx 2010 features for Intergraph Cadworx Equipment include an ANSI flange look-up table and an insulation feature. Features for Intergraph Cadworx PandID Professional include improved process and instrumentation diagramming capabilities, such as tools to selectively match database values from selected components, and capabilities to identify which values are to be inherited from process lines during component selection. The Intergraph Cadworx Plant Design Suite for process plant design offers intelligent drawing-to-database connectivity, advanced levels of design automation and easy-to-use design tools.

Because of these distinct advantages, EPC firms and owner operators in the process, power, water treatment, pharmaceutical, food and beverage and semiconductor industries have rapidly adopted it. Cadworx also offers the industry's first and only true bi-directional links between CAD and engineering analysis tools, linking Cadworx with Intergraph's pipe stress-analysis program, Intergraph Caesar II and pressure vessel and exchanger analysis program Intergraph PV Elite.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more