Portwell Appliance Supports Freescale Processor

Portwell's CAK-2000 1U rackmount network appliance supports the latest Freescale QorIQ P2020 communications processor. Incorporating the 45nm Freescale processor based on Power Architecture core with SOI technology low-power platform, Portwell's CAK-2000 network appliance delivers high single-thread performance per watt and dual-core frequency up to 1.2GHz. Optional Freescale Vortiqa software also forms a part of the package and is designed to help users simplify migration to the expanding range of multi-core processor applications.

Integrated security engine support protocols includes SNOW, ARC4, 3DES, AES, RSA/ECC, RNG, single-pass SSL/TLS and Kasumi. Portwell's CAK-2000 1U rackmount network appliance also features: six LAN ports for 10/100/100 Ethernet; built-in two bypass/failover segments; up to 4GB DDR3 RAM with two DIMM sockets; bootable with SATA HDD via Linux operating system or SD Flash; onboard RJ45 console port; one Mini-PCIe slot; LEDs at front panel to show power, bypass and system status; software-controlled reset switch; drivers for controlling the reset switch and status LED; and an internal 150W ATX power supply.

CAK-2000 is regulatory-certification-ready and FCC/CE and UL-and RoHS/WEEE-compliant, which means that it can be used domestically and internationally out of the box. Designed for OEM branding, the appliance is suitable for applications in network security (such as IDS/IPS, Firewall, IPSec, VPN, Deep Packet Inspection, Anti-Spam, Anti-Virus and UTM); network management (such as Routers, RAS Gateways, QoS, Server-Load Balance, Wireless Controller and Streaming); plus telecommunications, industrial and military applications.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more