Ansys Software Helps GEA Niro To Optimise Design

GEA Niro has selected engineering simulation software from Ansys to optimise equipment design and reduce development time and costs. GEA Niro provides drying equipment, technology and know-how to the dairy, food, pharmaceutical and chemical industries. The suite from Ansys enables customers to optimise designs throughout the product-development process, especially in the early stages when changes can be efficiently and cost-effectively implemented.

GEA Niro is applying engineering simulation as it develops equipment and processes for transforming liquids into powders, a major consideration in the dairy, food, pharmaceutical and chemical industries. Drying plants are becoming more important in processing safer and more profitable products. Optimising the drying process requires an in-depth understanding of complex flow and thermal-exchange phenomena, and Ansys software helps engineers to simulate real-world conditions in performing comprehensive analysis.

Simulation results can be used to minimise energy requirements without compromising product quality. GEA Niro chose Ansys as a strategic software partner because the product portfolio covers all GEA Niro's simulation needs, now and for the foreseeable future. 'We have used fluid dynamics simulations for two decades, continually working to perfect the analyses and to make the most accurate modelling predictions within our technologies,' said Thorvald Ullum, fluid mechanics manager, GEA Niro.

'For example, GEA Niro developed the Drynetics method as a way of improving the reliability of the simulation of the spray-drying process. 'Now we're expanding our simulation facilities, using Ansys software to decrease the simulation time and further improve the results in areas such as high-turbulence, particle-laden flows,' he added.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more