Eaton Products Help Power World’s Largest Mobile Cone Rock Crusher

Diversified industrial manufacturer Eaton Corporation today announced that Brightwater Manufacturing Ltd. of Christchurch, New Zealand, is equipping the world’s largest mobile cone-type rock crusher, the TC1885C mobile crusher, with Eaton products. The TC1885C is used in rock quarries

Onboard the 140-ton machine are Eaton® heavy-duty Series 1 pumps that power track drive and conveyors, Vickers® screw-in cartridge valves for conveyor controls, and Aeroquip® hose and fittings for all fluid-conveying arteries. At the heart of the rock crusher is a sophisticated control system equipped with Eaton’s comprehensive F(x)™ electrohydraulic architecture. The hydraulic system was designed and supplied by Scarlett Hydraulics Ltd., New Zealand’s largest full line Eaton distributor.

Eaton’s electrohydraulic architecture gives new capabilities to Brightwater rock crushers, which traditionally have been equipped with Eaton pumps, motors, valves, and fluid conveyance products.  Eaton EFX 1624 and 1640 controllers sniff diagnostic information from the TC1885C engine’s CAN network, enabling Eaton’s accompanying CONTROL (F)x® programming software to monitor and protect the engine and hydraulics, plus ensure operator safety.  Adding controllers to its Eaton product lineup has enabled Brightwater to move closer to standardizing on Eaton components and a single-source hydraulics provider.

Eaton’s Hydraulics business is a worldwide leader in the design, manufacture and marketing of a comprehensive line of reliable, high-efficiency hydraulic systems and components for use in mobile and stationary applications. Mobile and stationary markets include agriculture, alternative energy, construction, forestry, manufacturing, material handling, mining, oil and gas, processing, transportation and utility equipment. Eaton’s Hydraulics Group provides customer-driven solutions under product names such as Aeroquip®, Boston®, Char-Lynn®, Eaton®, Hydrokraft®, Hydrowa®, Hydro-Line®, Integrated Hydraulics®, Synflex®, Vickers®, Walterscheid™, and Weatherhead®.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more