Leak-Free Mag-Drive Pumps for Hazardous Liquids

When pumping applications involve corrosive, toxic, explosive and other hazardous liquids Dickow magnetically coupled centrifugal pumps are a safe, reliable and leak-free option. Available from pumping specialists Michael Smith Engineers, the Dickow range of pumps includes the KM Series, capable of handling capacities up to 65 m3/hr at heads up to 65 metres.

All KM Series pumps are magnetically coupled, so they are leak free by design as there are no mechanical seals. They are available in either horizontal or vertical configuration and a choice of wetted materials including cast iron, cast steel and stainless steel. The vertical configuration option with the motor mounted on the top eliminates the need for a baseplate so is an ideal choice for where space is limited.

These robust and reliable pumps can handle liquids with viscosities between 0.1 cp and 200 cp at temperatures between -30 to + 200 Deg C. Other features include a pump sleeve bearing made from silicone carbide which is very hard wearing and resistant to corrosion and so guarantees long periods between servicing.

Typical applications for Dickow KM Series pumps include tanker loading and unloading and transferring to and from bulk storage vessels. For example, in food or beverage processing, soap and cosmetics manufacturing, biofuels production, bulk chemical storage, or wherever there is a need for reliable, leak free pumping of larger volumes of hazadous liquids.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more