ARBOR Introduces Slim Mobile POS Tablet Computer

ARBOR has lunched the brand new logistics tablet computer - G1050. The G1050 is powered by a 1.6GHz Atom Z530P processor, uses the GMA500 graphics controller, and comes with 2GB of DDR2 SDRAM system memory. Also with a 1.8" 32GB SSD storage installed. Featuring the low power consumption CPU and an internal 1880mAH battery plus a hot-swappable 2500mAH battery, the G1050 provides operating time up to 9 hours.

The G1050 adopts 10.4" TFT active matrix with resistive touch screen enhancing operating efficiency. Its seamless and chemical resistant designed panel also makes it easy to be cleaned. IP54-rated for anti-water and anti-dust along with vibration (3 Gms), shock (40G) and drop resistance (4 feet) design offers protection which keeps the system working stably as well as extends its service life.

G1050 integrates a wide variety of interfaces including two USB 2.0 ports, a SIM socket, a SD/SDHC card slot, an Express Card 54 along with desktop cradle for different operation method which supports further expansion such as three USB ports and a LAN port. Furthermore, G1050 offers multi-network connectivity including Wi-Fi, Bluetooth and Gobi 3000 HSUPA module for facilitating data transmission.

The primary target market of G1050 is POS and logistics for warehousing application, stock management, for example. G1050 comes with multiple identification devices including a 1D/2D barcode scanner and a RFID reader while provides a 2.0 megapixels CMOS camera for data retrieving and image capturing.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more