DRA Series Offers Compact DIN Rail Mounted AC & DC Output Solid State Contactors

The DRA Series now offers compact DIN Rail Mounted AC & DC Output Solid State Contactors which are ideal replacement of EMRs, specifically in motor applications. The models added to this series include 3 phase UL approved AC output ratings of either 1 or 2 horse power at 480 VAC in both contactor and motor reversing configurations, and UL approved DC output ratings of ¼ horse power at 90 or 180 VDC. Designed for easy mounting to standard 35 mm DIN Rail, the new DRA Series of 3 Phase AC and DC output ready-to-use Solid State Contactors and Motor Reversers are available in a variety of output and input ratings.

3 Phase AC Contactors & AC Motor reversing Contactors
  • Ideal for applications up to 2 Horse Power
  • 45 mm wide 3 phase & 62 mm wide motor reversing DIN rail mountable versions available
  • 480 VAC Operating Voltage
  • 5 VDC, 24 VDC, 48 VAC, 120 VAC & 230 VAC Input Control Voltage options available

DC Motor Reversing Contactors
  • 54 mm wide motor reversing DIN rail mountable contactor package
  • 90 VDC & 180 VDC Rated Operating Voltage
  • 5 to 15 VDC & 15 to 32 VDC Input Control Voltage options
  • Convenient FET switches in H-bridge configuration for Motor Reversing applications

  • Protective Forward/Reverse interlock built-in function for Motor Reversing
  • UL and IEC Resistive & Motor ratings available
  • LED Status indicator for Input Control Voltage
  • No heat sink required & cage style screw terminals for easy installation & reliable wire connection
  • CE & RoHS Compliant

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more