Aircheck Wi-Fi Tester Troubleshoots WLAN Networks

Fluke Networks has launched the Aircheck Wi-Fi tester, a dedicated handheld tool that is said to deliver quick and easy troubleshooting for wireless local area networks (WLAN). The rugged and intuitive Wi-Fi tester can be learned and used in minutes by frontline IT professionals, according to the company. It is described as an affordable option for both large and small enterprises. Through an intuitive interface, users can verify and troubleshoot 802.11 a/b/g/n network availability, connectivity, channel utilisation and security settings.

The Aircheck tester allows users to identify coverage and connectivity problems, find unauthorised or rogue access points, see overloaded networks and channels, detect interference and validate security settings. Booting up in less than three seconds, Aircheck automatically starts discovering networks, access points and channel activity immediately. The tester, which has a five-hour battery life, is suitable for one-handed use and most operations require only one or two key presses.

Testing sessions can be saved with the press of a single key, and then downloaded via the USB port to a PC for report generation or archiving with Aircheck Manager software. These features are said to be particularly valuable for trouble ticket resolution or escalation, enabling broad access to all the session data captured by the Aircheck Wi-Fi tester. The tester's intuitive interface is built around a 2.8in full-colour LCD screen and a simple menu-based system.

The tester measures 3.5 x 7.8 x 1.9in (8.9 x 19.8 x 4.8cm) and weighs 14oz (0.4kg). Aircheck Manager software, which is supplied with the unit and runs on a host PC, manages all Aircheck profiles and the information collected from multiple Aircheck testers. The software can help IT support personnel close trouble tickets more efficiently or fully document the problem for support escalation.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more