AAEON Releases A New Hot Swappable Appliance Product: FWS-7800

AAEON, a premier Industrial PC manufacturer, releases a new 1U Intel® Xeon™ 3400 Series Network Appliance with 10 LAN Ports: FWS-7800. This 1U compact chassis, highlighted by a terrific thermal solution, is another complete system solution in the networking appliance product line.

The FWS-7800 features the Intel® Xeon Quad Core™ 3400 Series Processor with the Intel® 3450 Chipset. The System Memory supports 240-Pin Dual-Channel ECC DDR3 1066/1333 and four SDRAM DIMM (Up To 16 GB). The SSD consists of a CompactFlash™ Type 2 Connector (ATA Mode). The FWS-7800 also offers a Mini-PCI Type 3 Socket for more expansion options. There are copious I/O ports, such as six USB 2.0, 10 LAN (Optional), one Power LED, one Bypass LED, one LCM Display, one PCI-E/PCI-X/PCI Expansion Slot, and one HDD Active LED connector.

"The FWS-7800 has hot swappable design configurations for PER-C31L, PER-C33L, PER-C34L and PER-C35L modules," says Curtis Lai, Product Manager of AAEON's Industrial System Division. "It also offers Advanced Bypass Functions, such as Power Failure Mode, Jumper-less, System Failure Mode and a Programmable Force Bypass Mode. All of these options make the FWS-7800 exceedingly effortless to work with."

Key features of the FWS-7800 include Console Redirection, Software Buttons, a Remote Boot from LAN, a LCM & Keypad Control, and 2-10 RJ-45 ports or Dual 10G Ethernet Fiber Solutions. It also features a Patented Expansion Slot Bracket. This Bracket is easy to install, has a screwless design, and is flexible for expansion. The user can decide upon various expansion buses for their system by PCI-E/PCI-X/PCI Bus in the 1U system.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more