Development of the "CV Series" 125V, Chip-type Conductive Polymer Aluminum Solid Electrolytic Capacitors with the Highest Rated Voltage in the Industry of 125V

Nichicon Corporation is responding to demands for higher withstand voltages and reliability in chip-type conductive polymer aluminum solid electrolytic capacitors, and we have developed the CV series 125V for application in industrial machinery and automobiles. The highest rated voltage of the CV series was 100V, but we have expanded the rated voltage to 125V, the highest in the industry.

The line-up will be on display at the CEATEC JAPAN 2012 exhibition to be held at Makuhari Messe from 2–6 October (Tues-Sat).

Since the aluminum solid electrolytic capacitor that uses conductive polymers has outstanding ESR* characteristics in the high frequency range, it is frequently used in computers, flat-screen TVs and other digital devices. In addition to its ESR characteristics, it has permissible ripple performance and great stability at a wide range of operating temperatures, allowing the pursuit of products with higher withstand voltages in the field of industrial machinery and automobiles. These are the market needs which this product can answer to.

By further optimizing the method of conductive high polymer formation, part composition and element design in this product, we achieved the highest rated voltage in the industry of 125V, surpassing the rated voltage announced last year of 100V. This will contribute to the miniaturization of set devices through further expansion of its applications and reduction of the parts count in circuit boards.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more