Embedded Artists' 1.5 inch RGB OLED Module

Today we release a 1.5 inch RGB OLED 128x128 px Add-On Board.

The module use the UG-2828GDEDF11 OLED from Univision Technology with integrated controlled chip SSD1351 from Solomon Systech.

The display has an SPI or 8-bit parallel interface and is simple to control. The display module connects to Embedded Artists' standard 14-pos expansion connector, and then uses the SPI interface. Several of our products have the serial expansion connector on-board.

Embedded Artists' 1.5 inch RGB OLED Module adds color graphics capabilities to your project.

The module used the UG-2828GDEDF11 OLED from Univision Technology with integrated controlled chip SSD1351 from Solomon Systech.

The display has an SPI or 8-bit parallel interface and is simple to control. The display module connects to Embedded Artists' standard 14-pos expansion connector, and then uses the SPI interface. Several of our products have the serial expansion connector on-board.

A small graphical library for the display, with basic drawing operations, can be downloaded from our support page after purchase of the display.

Comments

Popular posts from this blog

What is Class I Division 2?

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

7/8 16UN Connectors that Provide 600 Volts and 15 Amps