PLD-16 series (16W Constant Current LED Power Supply with PFC Function)

After the launch of AC/DC LED power supply with constant current (C.C.) mode and PFC function ~ PLD-25 series (25W), MEAN WELL continuous to introduce PLD-16 series (16W) to fulfill the lower wattage demand of LED indoor/ decorative lighting market. Thanks to the simplified single stage PFC topology, the required high power factor (PF>0.9) can be achieved economically.

PLD-16 series can be used in 115VAC or 230VAC utility power regions, and also fulfills the usage of 277VAC main power system in North America. With constant current (C.C.) output, the efficiency of these new models are as high as 86% and hence can operate between -30 ~ +50℃ by only free air convection. All series are semi-potted for PCB protection (IP30 level) to provide the basic ability of anti-moisture, anti-dust as well as heat-conduction purpose. With double insolated two wires input design (Class II, no FG), these LED drivers are enclosed by plastic case with 94V-0 fire prevention level, which can protect the users against electric shock. In addition, these series comply with global certificates per UL8750, EN61347-2-13, and EN62384 and also meet with major lighting regulations such as CE and FCC, which are perfectly suitable for LED-based indoor lighting and decorative lighting applications.
  •     AC input range 90~135VAC or 180~295VAC
  •     Built-in active PFC function
  •     Constant current (C.C.) output: 350mA/700mA/1050mA/1400mA
  •     High efficiency up to 86%
  •     Cooling by free air convection
  •     Plastic case with UL94V-0 fire prevention level/ IP30 design
  •     Class II design, no FG
  •     Protections: Short circuit / Over temperature
  •     Approvals: UL8750, ENEC EN61347-2-13, EN62384, CE, FCC
  •     Dimension (LxWxH): 84x 57x 29.5mm
  •     3 years warranty

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more