ANDERSON POWER PRODUCTS® INTRODUCES THE LOW PROFILE PCB POWERMOD® PSX FOR BLINDMATE APPLICATIONS

Anderson Power Products (APP), a leader in the design and manufacture of interconnect solutions, announces a new addition to its family of PCB products with the release of the POWERMOD PSX product line. This low profile, family of connectors is 30 percent smaller than comparable products, and is perfect for when board space is at a premium and overall mating heights must be minimized. The connectors are ideal for power connections to embedded AC/DC power supplies or for board-to-board connections in servers, storage enclosures and communications equipment. Target markets include: Telecommunications, Datacom/Network backbone, and Data Storage.

The streamlined design of the POWERMOD PSX offers excellent performance with power contacts rated to 60 amps and signal contacts rated to 1 amp (ratings per UL1977). The POWERMOD PSX series is available in either power and signal versions or power only to provide power distribution and control in a single connector body. The combined power and signal connectors offer 80 signal contacts, in addition to either 2 or 4 power contacts. The power only connectors are available in 2, 4, 6 and 8 contact configurations. Both versions offer male connectors in vertical and right angle configurations and a vertical female configuration to deliver support for coplanar, backplane or mezzanine connections.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more