New IEE Low-profile 1D/2D Scanner Goes Beyond Simple Price Verification

IEE, Inc., renowned for its innovative, cutting-edge display technologies, has enhanced its popular ScanVue retail price scanner to include reading of both 1D and 2D barcodes in the same unit.

Available at the same price point as the previous model, the new ScanVue2D now enables retailers to turn a simple price verification system into a powerful consumer engagement tool. The unit is easily installed in retail POS locations, such as on the store floor or in stand-alone kiosks.

Although initially developed to check pricing on the retail floor, ScanVue2D uses a highly-integrated ARM processor that supports 2D animated graphics and video playback capabilities. Retailers can now deliver more content and customized messages directly to in-store customers while they are still shopping.

A highly-integrated ARM processor and a more sophisticated scanning engine make the unit 50% faster, further increasing the consumer’s ease of use. The processor also opens the door for the integration of autostereoscopic 3D imaging, viewable with the naked eye (no glasses needed), as well as for larger displays in standard or wide formats with a higher resolution.

The unit’s slimmer profile enables easier installation in a larger number of areas. Custom casings, such as size, design and color, are also available from IEE.

ScanVue2D supports standard 802.11 b/g/n RF technology, the most current available. The industry-standard 5.7” QVGA display offers enhanced color and image clarity via the 320x240 pixel resolution. In addition to 1D and 2D scanning, ScanVue2D quickly and accurately reads QR, Micro CR and postal codes.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more