Milwaukee® Introduces New-to-World Product for Testing Fluorescent Lighting

Milwaukee Tool Corporation continues to expand their Test and Measurement line with the introduction of a new-to-world product for testing/troubleshooting fluorescent lighting. With the ability to test fluorescent gas, check pin connections and test ballasts, the Milwaukee® Fluorescent Lighting Tester will allow professional Electricians and Building Maintenance Technicians to troubleshoot an entire building in half the time.

“There are 1 million electricians and 1.6 million maintenance technicians across the US alone, and Lighting is the #1 or #2 application for both of these groups,” says Jon Morrow, Director of Marketing, Test and Measurement for Milwaukee Tool Corporation. “Fluorescent lights make up the vast majority of the lighting used in commercial and industrial locations, but no complete tester exists in the market.  Without a complete solution, professionals have adopted a replace and hope strategy…change the lamp or ballast and hope that fixes the problem. With the new Fluorescent Lighting Tester, professionals can troubleshoot with confidence.”

Complete with a 2-1/2 foot, fully retractable antenna, users can easily reach all lighting fixtures. And since they will only change the lamps and ballasts that need replacing, users will save invaluable time and money by adding this easy-to-use tool to their arsenal.

Additional features include a removable antenna adaptor to increase “flicker” response, audible and visual indicators for easy readings, a built in LED work light to illuminate dark work spaces, and a rugged over-mold grip for increased durability.

With the introduction of these new products and plans to grow the Test and Measurement line in the future, MILWAUKEE® remains unwavering in their commitment to the trades, and will continue to offer innovative solutions in safety, performance and productivity.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more