UNIVEX PREMIUM – 17mm End Mills and Face MIlls 90°

LMT-Fette is pleased to announce UNIVEX PREMIUM. This new generation of 90º end mills and face mills is designed with ultra-high positive geometry and unequal pitched flutes for smooth performance, and a true 90º design for efficient and accurate corner milling. LMT-Fette’s new UNIVEX PREMIUM series of square shoulder mills achieve high feed rates, resulting in reduced cycle times. Unique ultra-durable nickel-plated bodies ensure long-term performance. The UNIVEX PREMIUM end mills and face mills are designed with thru-the-tool coolant supply improving chip evacuation and tool life. The UNIVEX PREMIUM end mills are available in Weldon shanks or straight shanks for precision mounting in end mill adapters.


The UNIVEX PREMIUM end mills and face mills feature precision indexable 17mm carbide inserts available with a variety of corner radii. A range of carbide substrates and coatings are available to meet your specific application needs, resulting in optimum cutting speeds and tool life, and excellent surface finishes.

 The UNIVEX PREMIUM end mill and face mill cutters are designed to cover a wide range of roughing and semi-finish milling applications. The UNIVEX PREMIUM cutters offer precise location of inserts to minimize witness lines when face milling. The milling cutters are available in course and fine pitch for maximum feed rates in specific material groups. The inserts and body pocket design offer unmatched performance and smooth cutting action when milling in all steels, stainless, and non-ferrous materials. The new UNIVEX PREMIUM features a longer insert edge length for greater depths of cut, up to 0.6709. All UNIVEX PREMIUM milling cutters are nickel-plated for long-term performance even when used in unfavorable conditions.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more