Silicon Software microEnable IV with new options

Silicon Software has reorganised the frame grabber series microEnable IV (mE IV) and presents software updates of the runtime and the Smart Applets user library.Due to the extension of the product range, Silicon Software has divided the frame grabbers of the microEnable IV series based on PCI Express into a price sensitive A series, with focus on the image acquisition and pre-processing, and a programmable V series, with focus on efficient and individual functions. Both series are available with CameraLink and GigE Vision interfaces and use the same driver and software basis. This allows the user to easily exchange the products and switch interfaces. Windows and Linux in 32 and 64 bit version are supported among others.

All microEnable IV frame grabber cards are supplied with Acquisition Applets. These support robust and efficient frame grabbing and simple frame pre-processing functions that can be used to increase the image quality or correct the frame in real time without additional loading on the host CPU. The vision boards of the V series are prelicensed for Visual Applets and Smart Applets. With the Visual Applets graphic development environment for FPGA programming and Smart Applets libraries for complete and partial image processing solutions, it is possible to speed up applications without additionally straining the host CPU.

Both series have a trigger extension board for acquisition timing and external control of peripheral devices such as light sources. The V series also has an optional daughter board for expanding the available FPGA & memory. The new series by Silicon Software offers with its product matrix a wide range of interfaces and a perfect technical and budgetary solution tailored to different applications.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more