Ocean Optics Spectrometer Helps Dentists Use Curing Lights More Effectively

A spectroradiometrically calibrated USB4000 Spectrometer from Ocean Optics is helping dentists to use curing lights more effectively to harden the white resin composites used to fill cavities. The spectrometer is a key component of the Managing Accurate Resin Curing (MARC) system developed by Dr. Richard Price and researchers at Dalhousie University (Halifax, Nova Scotia) and commercialized through BlueLight analytics inc.  Dr. Price has used Ocean Optics equipment in his laboratory since 2002 to measure the output from dental curing lights.  The results of his research have been published in 15 papers internationally.

MARC measures the useful energy a simulated resin restoration receives from a dental curing light, a procedure that is affected by the location of the tooth, the type of resin used, the output of the curing light and the accuracy of the practitioner. Too much or too little exposure of the curing light to the restoration can lessen the lifetime of the filling and potentially damage the tooth.  With the MARC system, which includes a laboratory-grade NIST-referenced USB4000 Spectrometer, dental researchers, educators, manufacturers and clinicians can more accurately measure the irradiance (in mW/cm2) and energy per unit area (in J/cm2) delivered by various curing lights in the hands of different dental professionals.

Slightly larger than a mobile phone, the miniature fiber optic USB4000 Spectrometer uses a 3648-element Toshiba linear CCD array detector and high speed electronics. For the MARC system, the spectrometer has been spectroradiometrically calibrated using Ocean Optics’ NIST-traceable light source (300-1050 nm). MARC also uses the CC3-UV Cosine Corrector to collect radiation over 180º field of view. This collection device helps mitigate the effects of optical interference associated with light collection sampling geometry – for example, the distance of the light to the restoration.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more