Matrox Xenia Pro Validated on Eizo 8MP Display

Matrox is pleased to confirm that professional-grade monitor manufacturer Eizo Nanao Corporation is offering the Matrox Xenia Pro  for use with its latest high-resolution Eizo FDH 8MP medical display. With the Xenia Pro single-slot PCI Express board officially validated for use with the Eizo RadiForce RX840, users within the medical industry can take advantage of Xenia’s premium, triple digital-display support for versatile medical imaging. Xenia’s full dual-link bandwidth and display-resolution support are key contributors to its support of the RadiForce RX840.

"The Matrox Xenia Series is well-established within the medical imaging industry for its ability to power premium display solutions,” says George Rigas, Business Development Manager for Medical Imaging, Matrox Graphics Inc. “The RadiForce RX840 is a perfect fit with Matrox’s brand of high-performance display controller boards.”

The RadiForce RX840 boasts an ultra-high resolution of 4096X2160 within its 36.4-inch screen, while Xenia Pro can support two of these monitors - along with a third 4MP navigation console if desired - to provide the necessary desktop space to display all required open-image applications at once. This expansive on-screen work space delivers unprecedented medical imaging work flow, while featuring pristine image quality throughout.

"We are confident Xenia’s unique functionality will enhance healthcare professionals’ work flow and efficiency with the RadiForce RX840,” says Rigas.

Matrox Xenia Series provides triple digital-display support from a single slot PCI Express board including forward and backward-compatibility with a broad range of monitors and projectors for the utmost flexibility. Pristine image quality at resolutions ranging up to 8MP, new technology to enable optimum display calibration (via Matrox DLC™ and 8/10/13-bit gamma LUTs), and Matrox PowerDesk Zoom functionality enabling replication of any portion of a dual-display desktop onto a single projector are also key benefits. One GB of on-board memory for smooth, reliable performance boosts overall productivity, facilitating efficient diagnoses and reporting by medical imaging professionals on any known and approved display.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more