Sunon Power Motor Fan 40×40×56mm

Stability is always a top concern when users choose a server.  This is especially true when it comes to high-stability system operation for 1U rack servers where height and space are limited and high cooling capacity is crucial.

The Sunon Power Motor Fan 40×40×56mm is designed especially for 1U rack servers with strict requirements for cooling efficiency. It not only solves the problem of high system impedance in limited space by employing tandem fan operation to increase air pressure and achieve high cooling efficiency, but it also features low electricity consumption, superior sound quality, and smart fan control.

In addition to outstanding performance in cooling efficiency and high reliability, the sound quality performance of the Sunon Power Motor 4056 Server Fan conforms to the ECMA-74 standard.  Likewise, the fan meets Dell’s high standard for sound quality performance and has been successfully adopted by DELL in its new-generation 1U Rack Server.

Characteristics
  •     High Airflow and High Static Pressure.
  •     Excellent Sound Quality.
  •     Low Power Consumption due to its single-phase motor design.
  •     Soft Start design can reduce the power loading of system and lower the start-up noise.
  •     Feedback Control Design can be set according to customer’s need. Through precise control of fan speed, Sunon PMD 4056 provides more efficient cooling performance.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more