New MSI GTX 670 Power Edition Graphics Card with Triple Overvoltage and Improved PWM Boosts Overclocking Potential by 22.5% Latest Twin Frozr IV Cooling Runs 20°C Cooler and 11.7dB Quieter than Reference Board!

Leading mainboard and graphics card maker MSI today announced the release of its GTX 670 Power Edition (P/N: N670GTX PE 2GD5/OC and N670GTX PE 2GD5) graphics card. The new GTX 670 Power Edition is based on the MSI Power Edition architecture which incorporates Triple Overvoltage, a strengthened PWM enabling an impressive 22.5% boost in overclocking potential compared to the reference design. The new Twin Frozr IV Thermal Design keeps the card cool and MSI's exclusive Dust Removal technology ensures that the cooling module remains free of dust for optimal cooling performance. In addition, Propeller Blade technology offers 20% more air flow than conventional fans, effectively reducing temperatures by up to 20°C and noise levels by 11.7dB. The MSI GTX 670 Power Edition uses Military Class III components that give overclockers a level of quality and stability they can count on. The power, cooling, and other components of the MSI GTX 670 Power Edition incorporate more functions and technologies than the reference board, making it the choice of those looking for superior overclocking performance.

MSI Power Edition Architecture Boosts Overclocking Potential by 22.5%

The MSI GTX 670 Power Edition graphics card is based on the MSI Power Edition architecture: Afterburner's Triple Overvoltage allows the GPU, Memory and PLL(Aux) voltages to be adjusted. The Enhanced PWM design provides 25% more current than the reference design to ensure high stability during overclocking.

Twin Frozr IV: 20°C Cooler and 11.7dB Quieter than Reference Board

The MSI GTX 670 Power Edition is equipped with MSI's latest Twin Frozr IV Thermal Design. MSI's exclusive Dust Removal technology automatically reverses the fans at startup to prevent dust build-up dust and optimize the cooling module's ability to dissipate heat. Patented Propeller Blade technology provides 20% more air flow over conventional fans and increases the effective cooling area. When combined with dual 8 cm temperature-controlled fans, SuperPipe technology, and a nickel-plated copper base, temperatures are effectively reduced by up to 20°C and noise by 11.7dB!

Military Class III Components Guarantees High Quality and Stability

MSI Military Class III components have been independently tested to meet many of the strict requirements specified by the MIL-STD-810G standard in order to guarantee high quality and stability. Military Class III components used on the MSI GTX 670 Power Edition include Tantalum Core Hi-c CAP, 30% more powerful SFC, and Solid CAP with up to 10 years of service life. This choice of materials reflects MSI's firm commitment to delivering trustworthy and dependable products to its customers.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more