Raychem C-Wrap Side Entry Repair Sleeve

TE Connectivity launches the new C-Wrap side entry repair sleeve for use in aerospace, defense and marine applications. The repair sleeve delivers an environment resistant repair to damaged primary wire with nicks, chaffed and radial cracks, while providing superior long-term performance.

“Our innovative C-Wrap device was designed specifically to meet the requests of the MRO community,” said Janeann Avants, product manager, Global Aerospace, Defense & Marine, TE Connectivity. “Our design engineers focused on pushing the functionality and performance to deliver a great, permanent solution for wire repair. This cannot be found anywhere else.”

The easy-to-install solution consists of two pieces, the outer tubing and adhesive. The C-Wrap device is small in diameter and short in length, providing easy installation. With its wrap-around design, the repair sleeve eliminates the need to de-pin the connector for repair, saving time, cost and manpower. Its environment-resistant qualities prevent galvanic corrosion and allow use in a temperature range of -65°C to +175°C, all while meeting the performance requirements of D-6201.

Made of a meltable adhesive and radiation cross-linked modified fluoroelastomer insulation sleeve, the C-Wrap device meets the performance requirements of TE Connectivity D-6201 specification. Designed for long-term performance, the repair kit offers a permanent repair to the chaffed or cracked wire insulation. The C-Wrap device is color-coded, which provides proper sizing for each application, as well as ease of use.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more