Staco FirstLine® P — New Parallelable 3-Phase Uninterruptible Power Supply (UPS) is up to 98% Efficient; Ideal for Network Closets, Computer Rooms, and Data Centers.
As a standard feature, up to 8 FirstLine® P units (N + 1) can be run in parallel, providing redundancy for mission critical applications requiring no additional hardware. All units are hot swappable, for maximum flexibility, availability and expandability. Dual Bus System and Dynamic Dual Bus system configurations provide an efficient and reliable power source. The FirstLine® P requires only front, top or bottom access, so it can be placed against a wall, minimizing its footprint. Battery run times are best in class.
The IGBT-based rectifier solid-state technology reduces the impact of the UPS on the local supply and simplifies installation where there is limited power capacity in the form of available electrical supply rating or generator size. Classified as a “Zero Impact Source”, the FirstLine® P provides a high input power factor of 0.99, a low input current distortion of less than or equal to 3%, and a power walk-in function that ensures progressive rectifier start-up. It also performs as a high performance filter by protecting upstream power supply sources from any harmonics and reactive power generated by the loads power.
FirstLine® P models feature an output transformer with galvanic isolation (between the load and the battery supply) to provide greater versatility and installation options. The UPS can be supplied from two separate power sources (main power and a second emergency standby source) which can increase the resilience of single or parallel system configurations.
FirstLine® models are intended for applications with input voltage of 480 Vac and a range of +15 /- 20% without battery contribution (+15/-30 in battery mode). Input frequency is 45-65Hz. Progressive rectifier (walk-in) can be configured from 0 to 30 seconds. Delay of progressive start of rectifier (Power Walk-In delay timer) can be configured from 0 to 120 seconds. The entire FirstLine® range of products is compatible with capacitive loads such as blade servers, without any reduction in active power, ranging from 0.9 lead to 0.8 lag and up to 0.8 capacitive power, with a low derating equal to 15% of the active power (kW).
A user-friendly menu selectable display located on the front of the unit includes an alarm, emergency power off button, and LED indicators for bypass, main line, battery powering the load, load on bypass, and normal output. Communications options include NetMan 101/102 Plus, MultiCOM (1) 301/302, MultiCOM (2) 362, Multi I/O, IBM AS/400, NetMan, MultiPanel, PowerShield, and PowerNETGuard. Battery Racks, Power Distribution Units (PDU) and Static transfer switches (STS) are available to meet virtually any application. The two year on-site warranty covers parts and labor (start-up service required for warranty coverage). Field service programs – including preventive maintenance – are available to lower cost of ownership.
Multiple options which allow the FirstLine® P to be tailored to specific site requirements include isolation transformer, synchronizer device, parallel systems joiner device, interface for generator set, and a closed loop kit.