New Parallelable 3-Phase Uninterruptible Power Supply (UPS) Is up to 98% Efficient Staco FirstLine® PL Is Ideal for Applications from 10kVA to 100kVA New Technology to Debut at Data Center World, Booth #113

Staco Energy Products Company introduces the FirstLine® PL – a parallelable three-phase Uninterruptible Power Supply (UPS) for 10-100kVA applications.  These units boast AC-AC efficiencies of up to 94%, while delivering maximum availability and flexibility.  True on-line, double-conversion technology is achieved through IGBT and Digital Signal Processor (DSP) control, enabling delivery of a high input power factor of 0.99, and a low input current distortion of less than or equal to 3%.  Each UPS is covered by an industry-leading 2-year warranty and backed by a nationwide service program with optional preventive maintenance to lower cost of ownership.  The compact and reliable FirstLine ® PL is ideal for information technology (IT) applications such as computer rooms, and network closets, as well as broadcast studios, assembly/manufacturing lines, medical facilities, and other applications where a high level of available power are essential.

Up to 4 FirstLine® PL units can run in a parallel configuration, providing redundancy for mission critical applications or additional capacity.   FirstLine® PL requires only front, top or bottom access, minimizing its footprint.  Battery run times are best in class.

The IGBT-based rectifier solid-state technology reduces the impact of the UPS on the local supply and simplifies installation where there is limited power capacity in the form of available electrical supply rating or generator size., the FirstLine® PL provides a high input power factor of 0.99, a low input current distortion of less than or equal to 3%.  It also performs as a high performance filter by protecting upstream power supply sources from any harmonics and reactive power generated by the loads power.
FirstLine® PL models can be supplied from two separate power sources (main power and a second emergency standby source) which can increase the resilience of single or parallel system configurations.

FirstLine® models are intended for applications with input voltage of 208 Vac and a range of +20 /- 20% without battery contribution.  Input frequency is 45-65Hz.
A user-friendly menu selectable display located on the front of the unit includes an alarm, emergency power off button, and LED indicators for bypass, main line, battery powering the load, load on bypass, and normal output.   Communications options include Monitoring and Shutdown Software with SNMP Agent.  Extended Battery Cabinets, and Power Distribution Units (PDU) to match are also available.  The two year on-site warranty covers parts and labor (start-up service required for warranty coverage).  Field service programs – including preventive maintenance – are available to lower cost of ownership.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more