Skip to main content

Complete Energy Measurement SoC Provides More Management and Control of AC/DC Power Supplies

Maxim Integrated Products (NASDAQ: MXIM) announces the launch of a new Teridian/Maxim energy-measurement system on chip (SoC), the 78M6613. The 78M6613 is the industry’s first SoC energy-measurement solution for AC/DC power supplies that brings a higher level of management and control to servers and other equipment in data centers.

  The new Teridian/Maxim chip comes as Environmental Protection Agency (EPA)/ENERGY STAR® mandates toward greater efficiency and accurate energy measurement in data centers begin to bear down on enterprises around the globe. The 78M6613 enables the capture and reporting of real-time energy data, which provides data center managers with the ability to quantify where energy is needed, being used, and more importantly, being stranded. Visibility into this critical data is an absolute requirement in order to manage and control energy usage in power-starved data centers that cannot keep up with growing demands placed upon them.

“Power capping, load shedding and virtualization are all driving the need for real-time energy measurement and resource management in data centers,” said Jay Cormier, Maxim Integrated Products Director, Teridian/Maxim Business Management, Energy Measurement & Communications. “New technology and greater demands on data centers and enterprise networks are all making it even more important to understand where energy is going.”

With an embedded analog front-end and compute engine, small footprint, and embedded firmware, the 78M6613 is specifically optimized to address the unique challenges of precision energy measurement inside AC/DC power supplies. As with all Teridian/Maxim brand energy-measurement SoCs, the 78M6613 features best-in-class accuracy of ±0.5% over a 2000:1 dynamic range, but also provides powerful tools for self-calibration to help facilitate rapid design time and optimal manufacturing costs.

The 78M6613 is a highly integrated, single-phase, fully self-contained AC power-measurement and monitoring SoC integrated circuit with embedded AC load monitoring and control firmware. The small 32-pin QFN package is ideally suited for real-estate-limited designs such as power supplies, where power density and space are a premium. The 78M6613 features the full range of AC power diagnostics, including power, power factor, voltage current, voltage sag and dip. On-chip flash and a microcontroller (MCU) enable the storage of calibration coefficients and eliminate the need for external components.

Initially targeted at server power supplies, the 78M6613 is also suited to energy-measurement needs in data communications and storage equipment. The flexibility of the platform also makes real-time energy measurement a reality for home appliances, home automation networks and building automation.

The 78M6613 is available in a 32-pin QFN package. Production quantities are available now and the SoC is priced at $2.65 (1000 up, FOB USA). 78M6613 evaluation kits are also available.

Comments

Popular posts from this blog

Banner Engineering DF-G3 Discrete Fiber Amplifier Features World-Class Long Range Sensing Capability

Banner Engineering introduces its DF-G3 discrete long-range fiber amplifier with dual digital displays for use with plastic and glass fiber optic assemblies. Featuring increased sensing power, the DF-G3 can sense more than 3 meters (10 ft.) with opposed mode fibers or more than 1 meter (3 ft.) with diffuse mode fibers. The extra power provides increased detection reliability for dark targets at long range and enhanced detection sensitivity when using specialty fiber assemblies for large area and small part detection applications.

The DF-G3 is available with a single discrete output or two dual discrete outputs. The dual discrete outputs can be independently taught to trigger at different intensity values, which is ideal for correct part-in-place or error-proofing, bottle down, and edge guiding applications.

“We developed the DF-G3 fiber amplifier to meet our customers’ need to precisely detect smaller targets at longer ranges” said Dennis Smith, Senior Marketing Manager, Banner Engin…

IDEC Releases New Line of High Efficiency Power Supplies

IDEC Corporation announces the PS5R-V line of DIN-rail power supplies, offering their customers high-efficiency in a compact form factor at competitive prices. These power supplies suit a wide range of needs in the industrial marketplace, and carry all of the required certifications necessary for use in these demanding applications. This next generation of the industry standard PS5R power supply family has updated features and specifications to meet current and future needs.

The PS5R-V line of power supplies includes 10W, 15W, 30W, 60W and 120W versions, with additional versions coming soon. These power supplies have a very compact form factor with overall dimensions reduced by up to 25% from previous generations. The reduced form factors combine with DIN-rail mounting to free up valuable control panel space and reduce installation costs.

Operating temperature ranges up to -25 to +75 degrees C offer more versatility. These extended operating temperature ranges often allow these power…

TURCK M8 CORDSETS WITH 100 PERCENT SHIELDING OPTION PROTECT AGAINST EMI/RFI

TURCK is now offering the option to completely shield M8 picofast ® cordsets by connecting a braided shield directly to the coupling nut. This provides a cost-effective and reliable connection with 100 percent cable and connector shielding, which protects against electromagnetic and radio frequency interference.

The 3 and 4-pin cordsets are available with flexlife ® PVC or PUR jacketed cable. All connectors deliver IEC IP 67 protection.

The M8 picofast line, like most TURCK cordsets, provides male or female, straight and right angle connectors, standard and custom lengths, and pigtails or extensions. Fully encapsulated mating receptacles are also offered, completing the system.