Skip to main content

Wireless UPS Battery Monitoring System from Staco Energy Products Demonstrated Live During 7x24 Exchange Event in Orlando

FirstLine® BMS Wireless Battery Monitoring System will be demonstrated live at the Staco Energy Products information table during the 7x24 Exchange event in Orlando June 12-15, 2011.   This industry-leading technology and the application-specific UPS products they support are ideal for information technology (IT) applications such as computer rooms, network closets, data centers, computer networks, critical power management requirements, and applications where a high level of available power are essential.

Staco Energy will present the FirstLine® P family of UPS products with two different models for 10 – 100 kVA applications and for 80 – 125 kVA applications.  FirstLine® P models boast efficiencies of up to 98%, while delivering maximum availability and flexibility.

True on-line, double-conversion technology is achieved through IGBT and Digital Signal Processor (DSP) control, enabling delivery of a high input power factor of 0.99, and a low input current distortion of less than or equal to 3%.  Each compact and reliable UPS is covered by an industry-leading 2-year warranty and backed by a nationwide service program with optional preventive maintenance to lower cost of ownership.

FirstLine® P units can be run in parallel – up to 8 (N+1) for the 480VAC 80-125 kVA model, and up to 4 (N+1) for the 208VAC 10-100 kVA version.  This provides redundancy for mission critical applications yet requires no additional hardware.   All units are hot swappable, for maximum flexibility, availability and expandability.  Dual Bus System and Dynamic Dual Bus system configurations provide an efficient and reliable power source.  The FirstLine® P requires only front, top or bottom access, so it can be placed against a wall, minimizing its footprint.  Battery run times are best in class.

The IGBT-based rectifier solid-state technology reduces the impact of the UPS on the local supply and simplifies installation where there is limited power capacity in the form of available electrical supply rating or generator size.  Classified as a “Zero Impact Source”, the FirstLine® P provides a high input power factor of 0.99, a low input current distortion of less than or equal to 3%, and a power walk-in function that ensures progressive rectifier start-up.  It also performs as a high performance filter by protecting upstream power supply sources from any harmonics and reactive power generated by the loads power.

FirstLine® P models feature an output transformer with galvanic isolation (between the load and the battery supply) to provide greater versatility and installation options.  The UPS can be supplied from two separate power sources (main power and a second emergency standby source) which can increase the resilience of single or parallel system configurations.

Comments

Popular posts from this blog

Banner Engineering DF-G3 Discrete Fiber Amplifier Features World-Class Long Range Sensing Capability

Banner Engineering introduces its DF-G3 discrete long-range fiber amplifier with dual digital displays for use with plastic and glass fiber optic assemblies. Featuring increased sensing power, the DF-G3 can sense more than 3 meters (10 ft.) with opposed mode fibers or more than 1 meter (3 ft.) with diffuse mode fibers. The extra power provides increased detection reliability for dark targets at long range and enhanced detection sensitivity when using specialty fiber assemblies for large area and small part detection applications.

The DF-G3 is available with a single discrete output or two dual discrete outputs. The dual discrete outputs can be independently taught to trigger at different intensity values, which is ideal for correct part-in-place or error-proofing, bottle down, and edge guiding applications.

“We developed the DF-G3 fiber amplifier to meet our customers’ need to precisely detect smaller targets at longer ranges” said Dennis Smith, Senior Marketing Manager, Banner Engin…

IDEC Releases New Line of High Efficiency Power Supplies

IDEC Corporation announces the PS5R-V line of DIN-rail power supplies, offering their customers high-efficiency in a compact form factor at competitive prices. These power supplies suit a wide range of needs in the industrial marketplace, and carry all of the required certifications necessary for use in these demanding applications. This next generation of the industry standard PS5R power supply family has updated features and specifications to meet current and future needs.

The PS5R-V line of power supplies includes 10W, 15W, 30W, 60W and 120W versions, with additional versions coming soon. These power supplies have a very compact form factor with overall dimensions reduced by up to 25% from previous generations. The reduced form factors combine with DIN-rail mounting to free up valuable control panel space and reduce installation costs.

Operating temperature ranges up to -25 to +75 degrees C offer more versatility. These extended operating temperature ranges often allow these power…

TURCK M8 CORDSETS WITH 100 PERCENT SHIELDING OPTION PROTECT AGAINST EMI/RFI

TURCK is now offering the option to completely shield M8 picofast ® cordsets by connecting a braided shield directly to the coupling nut. This provides a cost-effective and reliable connection with 100 percent cable and connector shielding, which protects against electromagnetic and radio frequency interference.

The 3 and 4-pin cordsets are available with flexlife ® PVC or PUR jacketed cable. All connectors deliver IEC IP 67 protection.

The M8 picofast line, like most TURCK cordsets, provides male or female, straight and right angle connectors, standard and custom lengths, and pigtails or extensions. Fully encapsulated mating receptacles are also offered, completing the system.