OKI Delivers White Toner and Full-Color Capabilities to the Specialty Printing and Imaging Technology Markets with the pro920WT in the USA

OKI Data Corporation, an OKI Group company specializing in the printer business, today announced the addition of the pro920WT to its OKI proColor™ Series, an innovative line of products for color-critical applications in graphic arts and production environments in North America. The pro920WT is a tabloid/A3 digital color printer with high-quality, full-color capabilities plus white toner for graphics, signage and textile transfers. The innovative pro920WT is a cost-effective alternative to screen printing, and is the lowest-cost white toner product available in the marketplace today.

"The pro920WHT is the lowest-cost toner-based white solution product available to the graphic arts and production market," said Rich Egert, Strategic Technology Providers, General Manager for OKI Data Americas. "The ability to provide white toner broadens the possibilities of printing on a variety of clear and dark or solid backgrounds, and is an ideal solution for lower-cost textile transfer media for direct-to-dark fabric applications."

Available at a list price of $7,495 USD and operating at fast speeds of up to 31 ppm color/36 ppm mono(*1), the pro920WT employs High Definition (HD) Color printing technology with up to 600 x 1200 dpi resolution to deliver clear, sharp text and graphics whether on ordinary paper, custom or specialty media.

The pro920WT is available in North America exclusively through a select group of partners serving the graphic arts and production market. Each product is available with an industry-leading one-year On Site Warranty.

All OKI Data products are built on parent company OKI Data Corporation's history of leadership and innovation in color printing, such as digital LED technology and Single Pass Color. This technology allows OKI Data to manufacture products that require fewer moving parts for increased reliability.

OKI Data Americas provides live(*2), toll-free technical support 24 hours a day, 7 days a week, 365 days a year, with agents based in North America.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more