ICAM Launches Gold Series Post-Processors

ICAM Technologies has announced the release of its Gold Series product line of ready-to-use post-processors for Mastercam. The Gold Series products have been developed to support the most widely used machine tools and controllers with little or no editing required. As popular CNC machines are introduced into the market, additional Gold Series post-processors will be created and posted on ICAM's website. Gold Series post-processors are available from standard three-axis to five-axis milling machine and simple mill/turn applications.

Forward-looking optimisation features such as path planning, rotary axes pre-positioning and winding are also included. All Gold Series post-processors include the sample 'art-to-part' processes demonstrating its use, and are delivered with basic editing capabilities for special customer requirements. Independent part verification (tooling, fixtures, stock and part) to validate the cutting process, or integrated machine simulation and part verification (CNC machine model, tooling, fixtures, stock and part) to validate the complete manufacturing process may be delivered optionally with all Gold Series products.

Integrated machine simulation and part verification provide Mastercam users with the means to simulate and test NC programs against collisions and over-travel and to identify, list and display surface gouges, excess material, inaccessible areas and rapid-motion crashes at any time during the post-processing and verification phase.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more