Transcend Introduces Wide-temp SO-DIMM and Long-DIMM Memory Modules for Industrial Applications

Transcend Information Inc., a global leader in memory and storage products, now offers a complete lineup of industrial-grade SO-DIMM and Long-DIMM modules. Comprised of high-quality DRAM chips and components, these new memory modules are an ideal choice for demanding and non-stop applications such as transportation, POS terminals, embedded systems, medical computing and industrial manufacturing.

Transcend’s industrial-grade SO-DIMM series includes DDR, DDR2 and DDR3 memory modules, while Long-DIMM modules are available in DDR3 1333MHz memory. To ensure extra stability, all of these modules must pass rigorous temperature testing before they are deemed ready for operation and released into the market. With industrial range (-40° to 85ºC) operating temperature flexibility, the new wide-temp memory modules are specially engineered to maintain high performance even in extreme environments.

With thicker Printed Circuit Boards (PCBs) and 30u” gold contacts that are ten times thicker than standard PCBs, Transcend’s wide-temperature SO-DIMM and Long-DIMM modules are durable enough to withstand frequent insertion and removal, and also provide much better signal quality. Additionally, both the modules use industrial grade capacitors to ensure stable output voltages. This design allows for more efficient filtering in applications requiring maximum reliability, such as safety-critical industrial applications, medical instrumentation, etc.

Transcend’s industrial-grade SO-DIMM modules are currently available in the following varieties: 512MB DDR 400MHz, 1~2GB DDR2 533/667/800MHz, and 1~4GB DDR3 1333MHz memory. The Long-DIMM modules are available in 1~4GB DDR3 1333MHz memory. Both the new SO-DIMM and Long-DIMM memory modules are backed by Transcend’s Limited Lifetime Warranty.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more