PCA-6011 Full-Size Slot Single Board Computer Supports LGA775 Intel® Core™ 2 Quad Processor with VGA/Dual GbE

Advantech, the embedded platform and integration services provider, announces the new PICMG 1.0 full-sized single board computer— PCA-6011, designed with the Intel® G41 and the ICH7R chipset for industrial applications. PCA-6011 is a high performance quad core Processor with strong I/O capability. PCA-6011 supports LGA 775 Intel® Core™2 Quad, Core™2 Duo, Pentium® Dual-Core and Celeron® 400 series processors with FSB up to 1333 MHz and DDR3 800/1066MHz SDRAM up to 4GB. PCA-6011 is capable of software SATA RAID 0, 1, 5 & 10 to ensure high storage performance and data protection.

PCA-6011 features excellent graphic processing capability through its embedded Intel® Graphics Media Accelerator 4500 with shared memory up to 352MB. This latest industrial motherboard provides strong 2D/3D graphic processing power without the need for an additional add-on graphic card which reduces extra cost, power consumption and thermal design effort.

PCA-6011 has abundant I/O interfaces: it hasfour SATA2 ports supporting S/W RAID 0,1,5,10, providing high data transmission rates of (300 MB/sec) and super-reliable read/write performance. The two serial ports (COM ports) can be used for device control applications. Dual Gigabit Ethernet LANs offer strong networking capability and support teaming and fail-over function. More I/O interfaces like ISA, FDD, PS/2, and parallel port are provided to ensure full backward compatibility when transitioning to a new generation platform.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more