BOGE Extends Range of Small Screw Compressors

BOGE America, Inc. has recently extended the popular CL series range by introducing 10 and 20 HP models. The new models embody all the advantages gained from the existing range; very low sound levels, maintenance friendly construction and a small footprint making them the ideal choice for the smaller industrial user. The CL series from BOGE has long since been a popular choice with the smaller industrial compressed air users such as workshops and garages where these small and quiet screw compressors have been the ideal solution.

BOGE has now expanded the CL series range by introducing two new models, the BOGE CL 10 and CL 20 which extend the power band on this range up to 20 HP.

The CL series is noted for its very low sound levels, high performance damping and lamellar graphite casting ensuring highly effective silencing producing sound levels as low as 59 dB(A), making it ideal for point of use applications as well as a premium OEM choice.

The compact design further ensures a small footprint providing a space saving solution ideal for the workshop environment where space is at a premium.
All components and parts are easily accessible from one point allowing service and maintenance work to be carried out in a hassle-free manner.

The BOGE CL series has always offered great value for the money and has already proven to be a winner in its class where reliability and longevity are prerequisites for the end users.

The new CL series models are available in the standard pressure of 150 PSI. Output capacities range from 11 - 77 cfm.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more