Audio Grilles with Style

Precision Micro supplies a variety of decorative etched components to the automotive industry and is possibly the largest manufacturer of bespoke, metal audio grilles in Europe.

Located in the UK motor industry’s heartland, the Company has a history of supplying metal speaker grilles for many of the leading marques. Precision etched in a single process, an etched speaker grille can be both aesthetically pleasing and functional. The etched pattern can incorporate a variety of aperture shapes and can include part etched logos and discrete part numbers on the reverse side.

Precision Micro has recently developed LEEP (Laser Evolved Etch Process) a precision etching process that incorporates laser direct imaging for greater accuracy and repeatability. The process doesn’t rely on any physical tooling and has taken etching precision to new levels.

Hearing of this expertise, a major manufacturer of high-end audio visual equipment has commissioned Precision Micro to produce precision speaker grilles for its premium products. Unlike the majority of its competitors, the speakers and integrated grilles are a major visible feature so precision, quality and aesthetics are very important.

Tolerances for these components are very tight and exceed the capabilities of photochemical etching but Precision Micro’s highly accurate LEEP process meets the requirements.

Another important factor in the decision to use Precision Micro was the Company’s ability to handle metal sheet sizes up to 1.5 metres in length, a facility not readily available from other suppliers.

LEEP grilles are burr-free and stress-free and can be supplied in a range of finishes to suit the specific application.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more