ABB Introduces The LeanArc 1410 Robotic Welding Package

ABB Robotics, a leading supplier of industrial robots, has developed the LeanArc™ 1410, a fully configured, quick start robotic welding package with an array of options to suit the needs of many small to medium welding operations. The base package is priced in the range of $35,000 and includes an IRB 1410 robot; the new IRC5 Compact controller; a Fronius TransSteel 3500 power supply and wire feeder; and a Tregaskiss 500 Amp air cooled welding torch. End-users also have the option of Miller, Lincoln or ESAB power supply.

“The LeanArc 1410 responds to the demand from our distribution network and small to medium size metal fab and welding shops for an economical, easy-to-use robotic welding package that will deliver high quality welds all day long,” said Joe Campbell, vice president of the ABB Robot Products Group in the US. “The base package includes all a shop needs to set up a high quality robotic welding operation.”

The centerpiece of the package is the 6-axis ABB IRB 1410 robot, especially designed for arc welding, featuring a 5kg handling capacity with a supplementary 18kg load capacity on the upper arm for application equipment. Known for its compact design, long reach and robust construction, the IRB 1410 also operates at low noise levels with long intervals between routine maintenance. With superior positional repeatability (± 0.025 mm) the IRB 1410 delivers high quality welds even in tight, restricted locations.

Providing easy programming and superior control is the desktop sized IRC5 Compact controller, offering the same functionality as ABB’s industry leading IRC5 controller in a small, easy to place model. With powerful RAPID programming language and an array of arc welding software programs the compact controller allows less experienced end-users to easily program and operate the LeanArc 1410. The IRC5 Compact controller also enables easy commissioning through its single-phase power input, external connectors for all signals and a built-in, expandable 16 in, 16 out I/O system. And with the LeanArc 1410 package the compact controller will come with a special enclosure to protect it from welding debris.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more