Vibration Isolation Mounts are RoHS Compliant

JW Winco now offers cylindrical-type GN 351 vibration isolation mounts, which are suitable for the elastic mounting of machine units such as motors, compressors and pumps, in metric sizes. Designed to be simple and economical construction elements, the RoHS-compliant components are also known as vibration mounts, anti-vibration mounts, vibration bobbins or rubber bumpers. Their resilience and broad range of different sizes and dimensions allow these mounts to be used in many applications that require vibration isolation.

These mounts are available in three types: with two tapped holes; with one tapped hole and one threaded stud; or with two threaded studs. The mount body is made of natural rubber (NR), vulcanised, 55 durometer with a shore hardness of +/-5 degrees. The cover plate is made of steel, zinc plated, blue passivated and moulded in, as are the tapped inserts or threaded studs. Tapped and stud versions in inch sizes are available upon request. Specials, with certain minimum quantities, are also available. 40 and 70 durometer natural rubber material is available upon request.

JW Winco offers a selection of inch- and metric-size adjustable levers; cabinet U-handles; plastic and steel hinges and locking mechanisms; revolving and retractable handles; hand wheels, cranks and knobs; tube connection and conveyor components; levelling mounts; spring, ball and indexing plungers; jig, fixture and fastening components; retaining magnet assemblies; toggle clamps; metric casters and wheels; universal joints; oil-sight glasses; and metric tools for the industrial and commercial equipment industries.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more