Euromark Offers Start-ups U2 Inkjet Printer Trial

To celebrate the release of its U2 compact handheld inkjet printer, Euromark is giving start-up businesses the chance to trial the machine with no obligation to purchase. The company hopes that, by demonstrating the functionality and quality that can be achieved by using equipment such as the U2 Mobile, more businesses will consider direct print applications rather than printing onto labels, which is often more costly and laborious.

A development of the original U2, the U2 Mobile is said to be the most lightweight printer on the market and retains the affordability and multifunctional characteristics of its predecessor. Featuring a four-in-one design with a 2.8in LCD screen, a remote keypad, ink cartridge and print head all contained within a neat, hard-wearing box, it is a complete standalone inkjet printer. The U2 Mobile fits into an ambidextrous handheld trigger system and comes with an extended battery life of up to seven hours, allowing users to continuously print more than 200,000 high-resolution characters anywhere, at any angle without any ink leakage.

Its shaft encoder monitors the speed and position relative to the printing surface to ensure a consistently high quality and uniform print. The U2 Mobile's flexible design allows this machine to run various types of ink for numerous print substrates and identifies the type of ink used before automatically selecting the best printing parameters. For increased versatility, the U2 Mobile has a built in SD card slot, for easy software upgrades and data back-up.

Based on the plug-n-print concept for minimal downtime and maintenance, this compact, lightweight portable printer has six height ranges and the ability to print text, graphics and barcodes on up to four different lines in superior print resolution of up to 600dpi.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more