Five-Axis Vice can Grip on to Just 3mm of Material

Roemheld operates a try-before-you-buy policy on all its five-axis vices and clamps, allowing users to evaluate the products while using them in their own production environments. The horizontal, seal-less pumps with a permanent magnet drive system are particularly suited to transferring corrosive acids and plating solutions in surface treatment and finishing applications. Similar in construction to the other pumps in the 3M range, C MAG-P models feature an isolation shell that effectively separates and seals the fluid chamber from the atmosphere.

The combination of this seal-less design and the use of corrosion-resistant materials, such as PP and PVDF, make them particularly suited to handling aggressive fluids occurring in the process and chemical industries. The range includes a choice of models offering flow rates of up to 120mc/hr, with heads up to 44m and maximum system pressure up to 6bar. Options include close-coupled drives and universal flange connections to meet DIN PN16 and ANSI 150 requirements. MAG-drive pumps from 3M have numerous applications - for example transferring acids, alkalis, hydrocarbons, heat-transfer oils, liquid gases and toxic or explosive chemicals in the industrial and chemical industries.

They are also suitable for pumping low-viscosity surfactants, acids and clean-in-place (CIP) chemicals in the pharmaceutical and cosmetic industries. In the food and drink industries, they are useful for handling CIP chemicals such as sodium hydroxide, nitric acid and hydrogen peroxide and for pumping water treatment chemicals.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more