Compact Camera Offers Gigabit Ethernet Technology

Stemmer Imaging now offers a range of GigE cameras from IDS, including the GigE Ueye CP that is designed to reduce costs and simplify installation in applications where space is severely limited. The GigE Ueye CP has a compact housing of 29 x 29 x 41mm, yet offers all the benefits of Gigabit Ethernet technology such as a bandwidth of more than 100MByte/sec over cable lengths of up to 100m, as well as featuring Power over Ethernet (PoE) connectivity.

The combination of the small dimensions and PoE capability allows both power and data to be sent over a single Ethernet cable. A lockable connector for an external 12-24V power supply is also provided for non-PoE configurations, as well as trigger and strobe connections. Available in colour or monochrome versions and a choice of WVGA, 1.3-megapixel and 5-megapixel resolution, the GigE Ueye CP range features CMOS sensors with global and rolling shutters to give excellent image quality. All cameras have a C-mount lens connector and offer a host of optical filters, such as IR, daylight-cut filter or glass.

The new range, like all other Ueye camera models, comes complete with tried-and-tested software tools such as Camera Manager and Ueye Demo to facilitate rapid camera integration. Camera Manager ensures fast plug-and-play configuration on both Windows and Linux systems. For added versatility, the cameras are supplied complete with interfaces for various image processing packages, including Common Vision Blox from Stemmer Imaging; standard drivers such as Directshow (WDM); a Genicam interface; and a software development kit.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more