Mobile App Improves Interaction with Product Data

The Teamcenter Mobility mobile device application (app) enables instant access - from Wi-Fi or mobile broadband-available locations - the product knowledge managed by Siemens' Teamcenter software. Through the use of this app, which is being initially deployed on the Apple Ipad portable digital device, companies can enhance their ability to interact with product data and workflows at the right time, in the right place and in the right context to further enhance the speed and accuracy of decisions made throughout a product's lifecycle.

Teamcenter is claimed to be the most widely used PLM system in the automotive and aerospace industries, and is used in other industries such as consumer products, shipbuilding and high-tech electronics. According to Siemens, companies in all these industries need to rely on the input of typical office-based personnel, as well as critical feedback from individuals who may be working in less conventional locations. This mobile workforce can include executives who spend a significant amount of time in airports, aboard aircraft or attending meetings at remote locations.

It could also include field personnel working inside a partially assembled airplane fuselage or walking the shop floor of an automotive assembly line. Teamcenter Mobility enables these individuals to quickly search, view and interact with product and process workflow information on the spot using a convenient mobile device. This enables decision makers to make critical decisions without delay using the most up-to-date information, while allowing contributors to provide their unique perspective in real-time.

As a result, companies can react quickly and intelligently to the rapidly changing environments associated with all product-lifecycle disciplines such as design, simulation, manufacturing and maintenance. Teamcenter Mobility currently enables the user to search, display and interact with detailed product information, including 3D product models.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more