KYOCERA Introduces New MEGACOAT Cermet Cutting Tools in Grade PV7025 for General Machining of Steel

Kyocera Industrial Ceramics Corporation, Cutting Tool Division today introduced its new PV7025 PVD-coated cermet grade of indexable cutting tool inserts for general machining of steel.

Featuring Kyocera's new proprietary MEGACOAT PVD* coating technology, PV7025 offers extraordinary wear resistance and heat resistance, providing superior durability in high-speed machining. When combined with a super micro-grain cermet substrate, the result is an exceptional cutting tool material for steel machining.

Kyocera's MEGACOAT Cermet features several key advantages, including:
  •     MEGACOAT Cermets are less chemically reactive than carbide, which reduces the tendency for built-up-edge and provides improved surface finishes.
  •     MEGACOAT Cermets are capable of running wet or dry, allowing reduced coolant costs and easier recycling of metal chips.
  •     Cermet pricing remains stable as compared to the rising cost of tungsten carbide.
  •     PV7025 maintains a Flexural Strength equivalent to P15 Carbide, making it capable of a wide range of cutting depths and feedrates, from continuous roughing to finishing applications.
PV7025 is the most recent addition to Kyocera's MEGACOAT Cermet family. Previously released grades include PV7010 for high-speed finishing of steel and PV7005 for cast iron machining. All three grades are currently available through a special sales promotion featuring introductory prices on popular geometries.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more