New Monitored Power Strips for Local and Remote Power Monitoring

API Technologies Corp.(NASDAQ:ATNY) (“API” or the “Company”), a provider of electronic systems, subsystems, RF, and secure systems for defense, aerospace, and commercial applications, is announcing that Spectrum Power’s product line of monitored rack mount power strips is available for ordering now, and they will begin shipping Spring 2012.

The new monitored power distribution units (PDU) provide both local and remote monitoring of voltage, current, and power factor. PDUs are employed in a variety of applications, including: data centers, communication systems, military and defense, and industrial infrastructure.

“The advantages of using a monitored PDU lie within its intelligent display and remote monitoring capabilities,” said Tracy Shaffer, Vice President, Spectrum Power product line of API Technologies. “The user can easily compare the measured value against the maximum limit of the PDU to determine whether additional equipment can be safely added. It also reduces the risk of an overload condition resulting in undesirable downtime.”

These new power strips feature at-the-rack monitoring with bright LED displays that are easily read up to 15 feet away. User-selectable local display modes include: continuous, auto cycling, or fixed reading. Remote monitoring can be done through USB connector or Ethernet port with Telnet, SNMP, or Web. The meter provides true-RMS voltage and current values.

Units are equipped with UL 489 listed circuit protection for added safety. Optional features include: EMI filtering, TVS (surge suppression), external temperature sensor, and more. They operate over a wide temperature range of -20° to 60°C, and provide maximum durability through rugged, long-life construction.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more