WAGO 804 Series Push-Button PCB Terminal Blocks

WAGO Corporation’s 804 Series Push-Button PCB Terminal Blocks provide jumper-free commoning to support manufacturers exporting LED devices and industrial electronics. Common European requirements limit ground circuits from crossing PCB. The modular 804 Series circumnavigates this with factory-assembled strips that include grounding for up to four clamping units via internal commoning. Units are available in 5mm (2–16 poles), or 7.5mm (2–12 poles) pin spacing.

804 Series provides tool-free, PUSH WIRE® terminations for solid and ferruled conductors AWG 28–12. Push-buttons simplify insertion/removal for fine-stranded conductors; the push-buttons also enable easy removal of all conductor types. CAGE CLAMP®S Spring Pressure Technology resists vibration, corrosion and thermal cycling for maintenance-free connections. The through-hole 804 Series is rated 300V/10A or up to 600V/20A (factory wiring).

CAST A LIGHT ON LED WIRING ACCURACY:

804 Series’ modular design reduces wiring errors in LED-based applications. It enables individual poles to be color-coded to match component wiring, e.g., black, white, gray, red and violet. The terminal blocks feature an integrated test port and provide marking via optional self-adhesive marker strips or custom, direct printing. Spacer blocks are optional to increase creepage and clearance distances where necessary. These conveniences have gained 804 Series a following among manufacturers of LED drivers and electronics, such as commercial-grade door devices.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more