Xantrex Expands TRUECharge2 Battery Charger Offering for Marine and Commercial Markets

Xantrex Technology announces the addition of three new 24V models – 10A, 20A and 30A to its top-selling TRUECharge™2 battery charger line. This complements its existing portfolio of 12V battery chargers that includes models ranging from 10A to 60A. Developed for both marine and commercial applications, the new 24V chargers are designed to charge 24V battery systems for trolling motors, dinghy davits, bow and stern thrusters in boats, as well as transit buses, power carts and commercial construction equipment.

In addition, an upgraded design feature of the TRUECharge2 line* includes the capability for “parallel stacking.” This allows two chargers of either 12V or 24V configuration to work together to combine the output current, achieving up to 120A for large battery banks. All TRUECharge2 models* use the same remote control panel, and accept 90-265 Vac & 47-63 Hz for global applications. Each meets stringent safety and regulatory standards including UL1564, UL1236 with marine supplement, ABYC and FCC Class B requirements.

“The TRUECharge2 battery charger series is one of our most advanced and successful product categories in the marine market,” said Xantrex Director of Sales John McMillan. “We have incorporated the new parallel stacking feature to provide a wider range of power levels for our customers."

Added Xantrex Sales Manager for Commercial Markets William Tomkinson, “This versatile product is a result of our commitment to a customer-focused strategy.  It is well designed to serve both commercial and industrial applications with 24V battery banks.”

Just like its 12V counterparts, the new 24V battery chargers are housed in an efficient compact design and delivers intelligent charging for DC systems.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more