Cost Effective Atom™ Based 2 Slot Fanless Barebone System Suited for Industrial Automation, Kiosk, POI, Digital Signage, Gaming and More

Axiomtek has released a new affordable 2-slot fanless industrial barebone system, the IPC922-212-FL.  This compact system comes with a single-core Intel® Atom™ processor D425 with 10-watt TDP or a dual-core Atom™ processor D525 with 13-watt TDP. With up to 4GB of DDR3 memory, this system is energy efficient and features fast processing speed.  To accommodate expansion capabilities for industrial applications, the IPC922-212-FL is outfitted with two (2) expansion slots with four (4) different combinations of PCIe and PCI slots.  This CE-certified unit is an application-ready solution ideally suited for industrial automation, kiosk, POI, digital signage, gaming, DVR and many more.

“The IPC922-212-FL with 45nm Intel® Atom™ processor D425/D525 up to 1.8 GHz and Intel® ICH8M I/O controller hub is a combination of power-efficiency and affordable solution for industrial and embedded applications.  This affordable barebone unit comes with an industrial-grade design to meet the critical demands of almost any rugged environments.” - Eric Chiang, Senior Product Manager of Product & Marketing Division at Axiomtek

Expansion Capabilities

The IPC922-212-FL is equipped with two (2) expansion slots with four (4) different combinations of PCIe and PCI slots for greater expansion options:
  • one (1) PCIe x1; one (1) PCIe x4
  • two (2) PCIe x1; one (1) PCIe x4
  • one (1) PCI-X; one (1) PCI
  • one (1) PCIe x four (4)
Front I/O Design & Power Connector Options

Using front I/O access design gives the operator the capability to deploy systems easier and faster, making upgrade/maintenance more efficient.  Additionally, this all-in-one fanless system offers industry-grade Phoenix type or DC-jack power connector plug as an option.

Through the integrated mobile Intel® GMA 3150 graphics core, Axiomtek’s IPC922-212-FL offers excellent graphics performance and supports numerous display options including VGA and LVDS.  This superior and compact fanless system measuring only 118 x 248 x 185 mm in size accommodates rich I/O including: one (1) Gigabit Ethernet port, six (6) USB 2.0 ports, four (4) COM ports (3 x RS-232 & 1 x RS-232-422-485), a VGA port and a remote switch connector.  For data storage, this system comes with one (1) 2.5” SATA HDD drive bay and a CompactFlash™ socket.  Windows® Vista, Windows® CE, Windows® XP embedded, and Linux are all supported in this system.

IPC922-212-FL is available now.

IPC922-212-FL Features:
  • Two (2) slot fanless barebone system with Intel® Atom™ processor D425/ D525 up to 1.8 GHz
  • Two (2) expansion slots with four (4) different combinations of PCIe and PCI slots
  • DC to DC power supply supports 18 ~ 28V
  • Front I/O access design
  • Optional industry-grade Phoenix type or DC-jack power connector plug

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more