An Industrial Touch Monitor with Integrated Services

Advantech (2395.TW), a leading global manufacturer of embedded platform solutions, is releasing the ITM-5112, a 12" SVGA Industrial LED monitor with fully flat resistive touchscreen.

Following ITM-5115 series, ITM-5112, provides customers with a complete selection of industrial grade display solutions. The basic ITM-5112,R M is a stand-alone monitor display with VGA/DVI interfaces; the ITM-5112, C series with an optional Box Computer in the rear is an all-in-one total solution; and the ITM-5112,R L and P series allow quick and easy integration with Advantech pluggable Embedded Box Computers via a 36-pin LVDS input interface and 164-pin golden finger connections.

Highly Efficient LED Backlighting
While most other industrial displays still use CCFL backlights, Advantech's ITM-5112, backlight panel takesadvantage of the reduced power consumption and increased display brightness offered by LEDs. The highly efficient ITM-5112, LED backlight provides a bright display with a wide dimming range, yet realizes a 20 ~ 30% reduction in power. Specifically designed for industrial applications and harsh environments, the ITM-5112, supports operating temperatures from -20 to 60° C, exceeding industrial standards, and the flat-sealed front panel has IP54 dust and liquid protection. The absence of an inverter makes for highly reduced EMI emissions.

More Flexibility, Better Stability
The ITM-5112, industrial monitor is both rugged and elegant, with the side frame rails tidily concealing a variety of peripheral connection cables. The fully flat front touch screen delivers a crisp viewing experience while allowing for easy cleaning. Panel, wall, desktop, and swing-arm VESA mounting are all supported, to accommodate a variety of application needs.

The touch screen, front bezel logo, and installation accessories can be fully customized, saving SI time and effort and shortening time-to-market. ITM-5112, is ideal for kiosk/POI use, HMI equipment controller monitor or other self-service equipment. For added flexibility, more Advantech Embedded Box IPCs designed to co-operate with the ITM-5112, will be available soon.

Last but not least, ITM-5112, is a complete product line that offers a variety of selections: standalone monitor, all-in-one computer, or even all-in-one computer with choice of OS system. ITM-5112,R M series (stand-alone monitor) and ITM-5112,R C series (all-in-one Embedded Box IPC) are available now, and will be followed by ITM-5112,R L series (LVDS interface) and ITM-5112,R P series (Pluggable Embedded Box IPC) in 2012/Q1.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more