The World’s First Differential Oscillators With ±10 ppm Stability And Only 500 Femtoseconds of Integrated RMS Phase Jitter

MSC now offers the SiT9121 and SiT9122 MEMS-based differential oscillators from SiTime. These differential oscillators feature a high stability of up to ±10 ppm and only 500 femtoseconds of integrated RMS phase jitter. They are ideally suited for use in centralized and edge routers, SATA / SAS / Fibre Channel Host Bus Adapters (HBAs), cloud storage systems, servers, wireless base stations and 10G Ethernet switches.

Both the SiT9121, designed for the frequency range 1 MHz to 220 MHz, and the SiT9122, for use in the high-frequency range 220 MHz to 650 MHz, are configurable to individual customer requirements. The frequency, which is programmable with up to 6 decimal places of accuracy, guarantees the highest level of accuracy.

Furthermore, 50,000 g shock resistance, 70 g vibration resistance as well as a mean time between failures (MTBF) of 500 million hours ensures the highest reliability even under harsh environmental conditions.

The differential oscillators are equipped with configurable LVPECL and LVDS signaling levels and are offered both in the extended commercial temperature range from -20°C to +70°C and in the industrial temperature range from -40°C to +85°C. The devices operate optionally with a supply voltage of 2.5 V or 3.3 V. In addition, the SiT9121 and SiT9122 are available in industry-standard packages with dimensions of 5.0 mm x 3.3 mm and 7.0 mm x 5.0 mm respectively and are 100% drop-in replacements for differential quartz oscillators without any design or layout changes.

Furthermore, as with all MEMS-based  products from SiTime, the SiT9121 and SiT9122 differential oscillators feature very short lead times. As a rule, samples are shipped within 48 hours ex factory and production quantities are delivered within 3 to 5 weeks.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more