Cut the Cords Loose, Turn up the Volume: TI Introduces PurePath™ Wireless Audio Products with USB Support

Texas Instruments Incorporated (TI) (NYSE: TXN), the industry leader in highly integrated wireless connectivity and wireless audio solutions, today introduced two system-on-chip (SoC) solutions in the PurePath™ Wireless audio product family, aimed at delivering uncompressed, CD-quality wireless multichannel and multipoint audio streaming capabilities to consumer applications with USB ports, such as PCs, TVs, set top boxes, game consoles and more. The new single-chip CC8521 and CC8531 solutions contain USB audio support for all major operating systems and can enable streaming of up to four simultaneous audio channels from one USB audio source. Together with a corresponding USB dongle reference design, the new PurePath Wireless products allow developers to design low-cost, small USB dongles for wireless audio applications, without code development or in-depth understanding of USB protocols. The CC8521 and CC8531 SoC solutions will be demonstrated during AES New York, October 20 to 23 in TI booth #847. For complete details, visit www.ti.com/purepathwireless-pr.

"By adding USB support to our PurePath Wireless audio solutions, we're making it easier than ever before for manufacturers to deliver wireless speaker systems, headsets and headphones with high-quality audio," said Erling Simensen, product marketing manager, wireless audio, TI. "With these products at hand, end users can easily add multichannel wireless audio functionality to the vast number of end equipments with USB ports, adding a new dimension to their listening experience."

Key features and benefits: TI's CC8521 and CC8531 PurePath Wireless audio solutions

  •     Out-of-the-box unwiring of headsets and speakers for PC, TV, gaming and set-top boxes
    •         USB audio support for Windows®, Linux®, Mac OS® X, Ubuntu®
    •         Requires no code development or in-depth understanding of USB protocol
  •     Low cost
    •         Single-chip solutions
    •         Small-size USB dongle reference design with low bill-of-material cost
    •         No software development required: Free Configurator PC software tool
  •     High quality of service for digital wireless audio transmission:
    •         16 bit / 44.1/48 KHz uncompressed audio with no unwanted noise or dropouts
    •         Best-in-class coexistence with Wi-Fi, Bluetooth® technology and other 2.4-GHz devices
    •         Low audio latency (20ms) distributed audio clock for synchronized wireless speakers
  •     Compatible with TI CC2590 range extender

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more